Vintage Wedding Makeover

MAKING PIN BOARDS COOL AGAIN

Even though your kids may not yet be addicted to electronic devises to plan their days and organise their time, it seems the old cork board in their room is not getting much of a look these days. That is until we pimped it! With one trip to the garage we had what we needed in minutes. All we needed was Montana METALLIC EFFECT Spray in the color black, Montana MARBLE EFFECT Spray, masking tape and a cork pin board (or similar).

WHAT WE DID

We cleaned the dust off and using our masking tape, we stuck a line of tape from one corner to the opposite side. But you could choose to mask any shape you like. After shaking all our cans well and removing the safety ring from under the nozzles, we grabbed our Black METALLIC EFFECT Spray and put 2 coats of paint on one side of the masking tape. The edge of the tape became our boundary to protect the clean side.

 

We let it dry and after lunch returned to apply some MARBLE EFFECT Spray.

 

This was fun to use and we noticed the changing the distance of the can to the pin board would give us different spray patterns on the board. By now the kids were watching over our shoulders eagerly, waiting for the finished product and its return to their rooms. We removed the masking tape, which left us with a crisp dividing line between the painted and non-painted sections. The pin board was back in service in a flash. All that and it wasn’t even dinnertime yet.

CategoriesEffect Marble Videos